DIY Message Center Board with Dremel Weekends

My husband and I are in the process of buying our first home.  I have put him to work with all kinds of projects so we can be ready to move in!  I was so excited when Dremel contacted us to try out their Dremel Saw-Max on a project from their site, Dremel Weekends!

We looked through all of the plans available on their site and settled on the Message Center.  I love organizing things and thought this would be perfect to keep things tidy when you walk in the door from the garage.  We headed to The Home Depot to get all the supplies and went to work!

DIY-Message-Center-Board-Tutorial

You can find the blueprint and step-by-step instructions of  how to do this project, HERE!

Here is a how we built our DIY Message Center Board:

You will need:
3/4″ MDF Panels
1/4″ MDF Panels
1 – 2×4 Plank
3 – 3/4″ x 4″ Poplar Planks
Thin Steel Rod
Finishing Nails
Wood Glue
Saw (we used the Dremel Saw-Max)
Drill Driver
Wood Screws
Cork and Dry Erase Boards (optional)

You are going to build the frame of the box first.
Here is the cut list for the box:

Picture 5

Here is how you assemble your box:
Picture 6

diy-message-board

Join your MDF pieces together with screws to create two rectangular boxes.

Picture 7

diy-message-board-shelves

metal-bars

Cut shelves from the MDF to size for the left box.  Space as desired and fasten with nails through both sides.  Next, you’ll space and measure holes to be drilled for the steel rods to hold papers.

Picture 8

right-side-shelf
Glue a piece of 1×2 poplar for a divider on the right side.

Picture 9Lay both of the boxes face down and measure and cut backs for both of the boxes using 1/4″ MDF and attach using finishing nails.

Picture 11

diy-message-board-shelves-standing

Lay the boxes face down next to each other and place a section of 2×4 in between them to act as the main support.  Attach a small piece of wood on the top and bottom for extra stability.  Secure your boxes to the 2×4 from the inside using nails or screws.

diy-message-board-stained

You can finish your Message Center however you want, but we followed the instructions from Dremel Weekends.

Here is the cut list for the finish work:
Picture 12

To finish, use wood glue and finishing nails to secure 3/4″ thick poplar.
Picture 13We also cut and attached cork board and dry erase board to complete our board.

For complete, full instructions for this project, check out Dremel Weekends!
Dremel Weekends also has tons of great projects for all skill levels!

Happy building!

Print Friendly, PDF & Email

Comment on this Post

5 Responses to “DIY Message Center Board with Dremel Weekends”

  1. Howdy fantastic website! Does running a blog such as this take a lot of work? I've very little expertise in programming however I was hoping to start my own blog in the near future. Anyhow, should you have any suggestions or tips for new blog owners please share. I know this is off subject nevertheless I simply had to ask. Thanks a lot! Take a look at my web blog ... Lakendra Topez

Leave a Comment