- Posted on
- 21 Comments
(base from a thrift store for $2 and lampshade from Target for $8)
fabric (enough to wrap around your shade)
hot glue gun/glue (optional)
Step 1: Lay newspaper out flat on a table. Start with lampshade on one side and start rolling it along the newspaper tracing the top and bottom as you go.
Step 2: Cut out the lampshade shape you traced from you newspaper. Wrap around the outside of your lampshade to make sure it fits properly. Trim down edges as necessary.
Step 3: Lay your newspaper cut out on top of your fabric. Trace around the edge of your newspaper adding a 1/2″ to each side. Having an extra 1/2″ on each side will allow you to fold the fabric over the edge of your shade so you can glue it on.
Step 4: After your fabric is cut, lay it face down and spray a thin layer of spray glue/adhesive to the back side. This stuff is very sticky and dries permanently, so make sure to not let it get on things you don’t want to be sticky. I found it works best to lay down a tarp outside and spray my fabric on top of that.
Step 5: After you have sprayed the back side of your fabric, quickly put it on the outside of your lampshade. Make sure to smooth out all bumps and wrinkles. If your fabric is patterned, make sure that your pattern is straight.
Step 6: Fold over one of the edges of the end of your fabric so it overlaps, creating a seam on your lampshade. Use a little spray glue or fabric glue to make sure your fold will stay in place.
Step 7: Fold the edges of your fabric over the edge of your lampshade and glue down using fabric glue.
Looking for other easy, inexpensive craft ideas?
Check out our Craft Index!